The short answer
Use a felt pad under a bedside lamp only when the nightstand maker confirms a soft pad is suitable for that exact finish and the lamp base is smooth and clean; otherwise leave the top bare and lift the lamp when dusting. The deciding condition is the contact between base and finish, not whether the lamp looks likely to scratch.
What to check before deciding
What changes when the lamp is moved for cleaning?
Picture a lamp you lift aside every week to dust: a hard base dragged across the top can pick up grit, and a pad may reduce that contact, but only if it stays flat and clean. A loose or gritty pad can trap debris and leave a mark of its own, and a damp pad should not sit against the finish. The trade-off is protection against an extra item that needs checking and cleaning.
Which care details should I confirm before adding a pad?
Ask the nightstand maker for care instructions for the exact top finish and whether a soft pad is acceptable; ask the lamp maker about the base underside and any care guidance. Confirm whether the pad should be removed for routine cleaning and whether adhesive-backed pads are permitted, because removal can affect some finishes. If either answer is unavailable, keep the top bare and lift the lamp rather than sliding it.
A practical checklist
- Inspect the lamp base underside for rough edges or trapped grit before it goes on the nightstand, and clean the base according to the lamp maker's instructions.
- Ask for the nightstand's care instructions in writing and confirm whether felt, soft pads or adhesive-backed pads are suitable for that exact finish.
- When dusting, lift the lamp straight up instead of sliding it, and remove any pad for cleaning if the maker says to.
These are general planning ideas. For an individual product, confirm its exact dimensions, care instructions and installation requirements.
Check the relevant collection or guide ↗